ABS 570 is an easy flowing grade of ABS for injection molding with high resistance to impact and heat deflection. In its natural color ABS 570 meets FDA requirements for food contact.
Housing / toys / small appliances / consumer products
High Impact / High Gloss
|Physical Properties||Typical Values||Test Method(s)|
|Melt Flow Rate – g/10 min (230°C / 10kg)||5.0||D-1238|
|Mold Shrinkage – in/in||0.004 ? 0.006||D-955|
|Tensile Modulus – psi||370,000||D-638|
|Tensile Strength at Yield – psi||6,100||D-638|
|Flexural Modulus – psi||380,000||D-790|
|Flexural Strength – psi||10,500||D-790|
|HDTUL Unannealed – 264 psi||185° F||D-648|
|Izod Impact Strength – ft-lbs/in||7.0||D-256|
|Rockwell Hardness – R Scale||109||D-785|
The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.
PrimaFlex® is a registered trademark of Plastic Solutions, Inc.