CP 1211 Copolymer Polypropylene


CP 1211 is a nucleated impact copolymer polypropylene with an excellent balance of stiffness and impact resistance for injection molding applications and compounding.


Automotive / Lawn and Garden products / Appliances


Excellent impact to stiffness balance Good mold flow FDA 21 CFR 177.1520

Physical Properties Typical Values Test Method(s)
Melt Flow Rate – g/10 min (230°C/2.16kg) 12.0 D-1238
Tensile Modulus – psi 191,000 D-638
Tensile Strength @ Yield – psi 3,000 D-638
Elongation at Yield – % 6.0 D-638
Flexural Modulus – psi 145,000 D-790
HDTUL – 66 psi 88°C D-648
Izod Impact Strength – ft-lbs/in
No Break D-256
-20°C 1.9 D-256
Izod Impact Strength – 0°C, ft-lbs/in 1.9 D-256
Rockwell Hardness – R 72 D-785

The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.

PrimaFlex® is a registered trademark of Plastic Solutions, Inc.

Let's Connect

Stay up to date on what's happening with PSI and explore partnership opportunities.






324 Tiney Road
Ellenboro, NC 28040-7611