CP 2003-BK is a medium impact copolymer polypropylene for use in injection molding applications.
Housewares / Small appliances
Excellent dimensional stability FDA 21 CFR 177.1520
|Physical Properties||Typical Values||Test Method(s)|
|Melt Flow Rate - g/10 min (230°C/2.16kg)||20.0||D-1238|
|Density – Specific Gravity||0.910||D-1505|
|Tensile Strength @ Yield – psi||4,300||D-638|
|Elongation at Yield – %||>10||D-638|
|Flexural Modulus - psi||120,000||D-790|
|Flexural Strength – psi||5,000||D-790|
|Izod Impact Strength @ 23°C||2.5||D-256|
|HDTUL - 66 psi||120? F||D-648|
The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.
PrimaFlex® is a registered trademark of Plastic Solutions, Inc.