CP 2012 Copolymer Polypropylene

Description

CP 2012 is a high melt flow rate, nucleated polypropylene impact copolymer formulated for improved flowability. It has optimum balance of stiffness and impact resistance for injection molded applications.

Applications

Pails / Crates / Small containers / Industrial applications

Features

Medium to high impact resistance Good impact to stiffness balance Superior moldability FDA 21 CFR 177.1520

Physical Properties Typical Values Test Method(s)
Melt Flow Rate - g/10 min (230°C/2.16kg) 20.0 D-1238
Tensile Strength @ Yield – psi 3,000 D-638
Elongation at Yield – % 5.9 D-638
Flexural Modulus - psi 140,000 D-790
HDTUL - 66 psi 85°C D-648
Izod Impact Strength – ft-lbs/in
23°C
No Break D-256
-18°C 2.6 D-256
Rockwell Hardness - R 61 D-785

The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.

PrimaFlex® is a registered trademark of Plastic Solutions, Inc.

Let's Connect

Stay up to date on what's happening with PSI and explore partnership opportunities.

Phone

678-353-2100

Email

info@plasticsolutions.net

Address

324 Tiney Road
Ellenboro, NC 28040-7611