GP 0400 General Purpose Polystyrene


GP 0400 is a medium flow crystal polystyrene for injection molding.


Electronics / Office accessories / Appliance components


Mar resistance, Economical alternative to SAN and PC, FDA 21 CFR 177.1640

Physical Properties Typical Values Test Method(s)
Melt Flow Rate – g/10 min (200°C/5.0kg) 3.5 D-1238
Specific Gravity 1.04 D-792
Izod Impact Strength @ 23 °C 0.4 D-256
Tensile Strength @ yield – ps 7,500 D-638
Flexural Modulus – psi 430,000 D-790
HDTUL – 66 psi 93 °C D-648

The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.

PrimaFlex® is a registered trademark of Plastic Solutions, Inc.

Let's Connect

Stay up to date on what's happening with PSI and explore partnership opportunities.





324 Tiney Road
Ellenboro, NC 28040-7611