GP 0900 General Purpose Polystyrene

Description

GP 0900 is a general purpose crystal polystyrene for both injection molding and cap layer coextrusion.

Applications

Cutlery / Coextrusion capping / Medical applications

Features

Minimal stress and fast cycles, FDA 21 CFR 177.1640

Physical Properties Typical Values Test Method(s)
Melt Flow Rate – g/10 min (200°C/5.0kg) 9.0 D-1238
Specific Gravity 1.04 D-792
Izod Impact Strength @ 23 °C 0.4 D-256
Tensile Strength @ yield – psi 6,700 D-638
Flexural Modulus – psi 440,000 D-790
HDTUL – 66 psi 90 °C D-648

The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.

PrimaFlex® is a registered trademark of Plastic Solutions, Inc.

Let's Connect

Stay up to date on what's happening with PSI and explore partnership opportunities.

Phone

678-353-2100

Email

info@plasticsolutions.net

Address

324 Tiney Road
Ellenboro, NC 28040-7611