HI 0802 is a high impact polystyrene for injection molding.
Consumer electronic housings / Housewares / Office accessories
Good balance of toughness and rigidity, Good processibility, FDA 21 CFR 177.1640
|Physical Properties||Typical Values||Test Method(s)|
|Melt Flow Rate – g/10 min (200°C/5.0kg)||8.0||D-1238|
|Izod Impact Strength at 23°C||2.0`||D-256|
|Tensile Modulus @ yield – psi||3600||D-638|
|Flexural Modulus – psi||340,000||D-790|
|HDTUL – 66 psi||92°C||D-648|
The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.
PrimaFlex® is a registered trademark of Plastic Solutions, Inc.