HI 0803 High Impact Polystyrene

Description

HI 0803 is a high impact polystyrene for injection molding.

Applications

Consumer electronic housings / Housewares / Office accessories

Features

Good balance of toughness and rigidity, Good processibility, FDA 21 CFR 177.1640

Physical Properties Typical Values Test Method(s)
Melt Flow Rate – g/10 min (200°C/5.0kg) 8.0 D-1238
Izod – ft-lbs/in, notched 2.8 D-256
Tensile Strength – psi 3,240 D-638
Tensile Modulus – psi 270,000 D-638
Flexural Strength – psi 5,760 D-790
Flexural Modulus – psi 270,000 D-790
Heat Distortion – °F 180 D-648
Vicat Softening – °F 208 D-1525

The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.

PrimaFlex® is a registered trademark of Plastic Solutions, Inc.

Let's Connect

Stay up to date on what's happening with PSI and explore partnership opportunities.

Phone

678-353-2100

Email

info@plasticsolutions.net

Address

324 Tiney Road
Ellenboro, NC 28040-7611