HP 1200 is a general purpose polypropylene homopolymer.
Caps & Closures / Opaque containers
High ESCR, Good Heat aging resistance, Good Stiffness, FDA 21 CFR 177.1520
|Physical Properties||Typical Values||Test Method(s)|
|Melt Flow Rate – g/10 min (230°C/2.16kg)||12.0||D-1238|
|Density – Specific Gravity||0.900||D- 792|
|Tensile Strength @ Yield – psi||5,000||D-638|
|Elongation at Yield – %||8||D-638|
|Flexural Modulus – psi||200,000||D-790|
|Izod Impact Strength – 23°C||0.6||D-256|
|Rockwell Hardness – R||105||D-785|
|HDTUL @ 66psi||100° C||D-648|
The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.
PrimaFlex® is a registered trademark of Plastic Solutions, Inc.