HP 2000 Homopolymer Polypropylene

Description

HP 2000 is a general purpose polypropylene homopolymer for injection molding applications.

Applications

Closures / small appliances / Housewares / Toys

Features

Unique combination of stabilizers, Good stiffness & ESCR, FDA 21 CFR 177.1520

Physical Properties Typical Values Test Method(s)
Melt Flow Rate – g/10 min (230°C/2.16kg) 20.0 D-1238
Density – Specific Gravity 0.900 D- 792
Tensile Strength @ Yield – psi 5,000 D-638
Elongation at Yield – % 8 D-638
Flexural Modulus – psi 200,000 D-790
Izod Impact Strength – 23°C 0.5 D-256
Rockwell Hardness – R 105 D-785
HDTUL @ 66psi 95° C D-648

The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.

PrimaFlex® is a registered trademark of Plastic Solutions, Inc.

Let's Connect

Stay up to date on what's happening with PSI and explore partnership opportunities.

Phone

678-353-2100

Email

info@plasticsolutions.net

Address

324 Tiney Road
Ellenboro, NC 28040-7611