HP 3500 Homopolymer Polypropylene

Description

HP 3500 is a low viscosity, polypropylene homopolymer designed for extrusion coating and non-woven applications

Applications

Fiber / Compounding

Features

Good processability, FDA 21 CFR 177.1520

Physical Properties Typical Values Test Method(s)
Melt Flow Rate – g/10 min (230°C/2.16kg) 35.0 D-1238
Density – Specific Gravity 0.902 D-1505
Tensile Strength @ Yield – psi 5,500 D-638
Elongation at Yield – % 9 D-638
Flexural Modulus – psi 270,000 D-790
Izod Impact Strength – 23°C 0.5 D-256A
Rockwell Hardness – R 100 D-785

The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.

PrimaFlex® is a registered trademark of Plastic Solutions, Inc.

Let's Connect

Stay up to date on what's happening with PSI and explore partnership opportunities.

Phone

678-353-2100

Email

info@plasticsolutions.net

Address

324 Tiney Road
Ellenboro, NC 28040-7611