LD 19009 is a LDPE formulation suggested for injection molding applications.
Caps and closures
Excellent balance of toughness and softness Good processability and dimensional stability Complies with FDA 21 CFR 177.1520
|Physical Properties||Typical Values||Test Method(s)|
|Melt Flow Rate – g/10 min (190°C/2.16kg)||7.0||D-1238|
|Tensile Strength @ break, psi||1,595||D-638|
|Tensile Strength @ yield, psi||1,305||D-638|
|Elongation @ break, %||548||D-638|
|Flexural Modulus, 1% Secant, psi||34,229||D-790|
|Flexural Modulus, 2% Secant, psi||30,603||D-790|
|Vicat Softening Point, F°||181||D-1525|
|Hardness, Shore D||53||D-2240|
The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.
PrimaFlex® is a registered trademark of Plastic Solutions, Inc.