LD 21020 Low Density Polyethylene

Description

LD 21020 is a LDPE formulation suggested for injection molding applications.

Applications

Container closures / Food packaging / Cosmetics/personal care packaging

Features

Excellent gloss, clarity, and warpage resistance Good processability on automatic molding equipment Complies with FDA 21 CFR 177.1520

Physical Properties Typical Values Test Method(s)
Density 0.924 D-4883
Melt Flow Rate – g/10 min (190°C/2.16kg) 20.0 D-1238
Tensile Strength @ break, psi 1,700 D-638
Elongation @ break, % 100 D-638
Flexural Modulus, 2% Secant, psi 33,000 D-790

The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.

PrimaFlex® is a registered trademark of Plastic Solutions, Inc.

Let's Connect

Stay up to date on what's happening with PSI and explore partnership opportunities.

Phone

678-353-2100

Email

info@plasticsolutions.net

Address

324 Tiney Road
Ellenboro, NC 28040-7611