PC/PBT 3015 Injection Grade Polycarbonate/PBT


PC/PBT 3015 is an injection grade polycarbonate/PBT.

Physical Properties Typical Values Test Method(s)
Specific Gravity 1.24 D-792
Melt Flow Rate – g/10 min 30 D-1238
Mold Shrinkage – % 1.4 1/8” section
Tensile Strength at Yield – psi 6,800 D-638
Elongation at Break – % >128 D-638
Flexural Strength – psi 11,000 D-790
Flexural Modulus – psi 290,000 D-790
HDTUL – 264 psi 188° F D-648
Izod Impact Strength – ft-lb/in 15 D-256

The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.

PrimaFlex® is a registered trademark of Plastic Solutions, Inc.

Let's Connect

Stay up to date on what's happening with PSI and explore partnership opportunities.






324 Tiney Road
Ellenboro, NC 28040-7611