PCABS 2512-U Polycarbonate/ABS

Description

PC/ABS 2512-U is an injection grade polycarbonate/ABS with UV stabilizer.

Physical Properties Typical Values Test Method(s)
Specific Gravity 1.11 D-792
Melt Flow Rate – g/10 min 25 D-1238
Mold Shrinkage – % 0.6 1/8” section
Tensile Strength at Yield – psi 7,200 D-638
Elongation at Break – % >140 D-638
Flexural Strength – psi 12,500 D-790
Flexural Modulus – psi 280,000 D-790
HDTUL – 264 psi 230° F D-648
Izod Impact Strength – ft-lb/in 12 D-256

The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.

PrimaFlex® is a registered trademark of Plastic Solutions, Inc.

Let's Connect

Stay up to date on what's happening with PSI and explore partnership opportunities.

Phone

678-353-2100

Email

info@plasticsolutions.net

Address

324 Tiney Road
Ellenboro, NC 28040-7611