SAN 0750-BT General Purpose SAN


SAN 0750-BT is an injection molding grade of transparent SAN with a blue tint.


Tumblers and mugs / Blender jars / Tableware / Dinnerware / Cosmetic packaging


Repeatable-use housewares FDA 21 CFR 181.32

Physical Properties Typical Values Test Method(s)
Specific Gravity 1.07 D-792
Melt Flow Rate – g/10 min (230°C / 3.8kg) 7.5 D-1238
Mold Shrinkage 0.003 ? 0.004 D-955
Tensile Modulus – psi 475,000 D-638
Tensile Strength at Yield – psi 10,500 D-638
Elongation at Yield – % 2.6 D-638
Flexural Modulus – psi 500,000 D-790
Flexural Strength – psi 16,700 D-790
HDTUL Unannealed – 264 psi 205° F D-648
Izod Impact Strength – ft-lbs/in 0.4 D-256
Rockwell Hardness – M Scale 83 D-785

The nominal properties reported herein are laboratory tested and are typical data for these materials. Plastic Solutions, Inc. does not guarantee suitability of these materials for specific applications. Each user of material should make their own tests to determine suitability of a material in a design or application.

PrimaFlex® is a registered trademark of Plastic Solutions, Inc.

Let's Connect

Stay up to date on what's happening with PSI and explore partnership opportunities.





324 Tiney Road
Ellenboro, NC 28040-7611